As we all know, there are many classifications of pcb boards, and the layouts are not nearly the same, but the types of sub-boards are quite small. There are more than 20 types of forests. In the face of different types, we are selecting the sub-boards. How to choose the board machine that suits your board type? Let's analyze it for you.

If your pcb board is a stamp hole or a bridge, then you can choose a curve board machine, and then ask a number of board machine manufacturers according to their daily output, efficiency requirements, and their own budget. Compare the price of performance product attributes, go to the factory to investigate, and finally determine which board machine to choose.

So what are the skills for choosing a curve splitter? Let me explain it to you next;

The first is that the chassis should be stable, because when cutting, if the chassis is stable, the cutting accuracy will be guaranteed.

The second is to choose a good quality spindle, because a good spindle will indirectly determine the cost, because the price of a spindle is not cheap, if it is replaced frequently, it may lead to cost increase.

Third, it is necessary to have a good dust box. If the dust box is not very good, or the suction force of the dust box is too low, the cutting dust may not be cleaned in time, which will affect the progress of cutting. If the requirements for the pcb board are relatively high, then the dust can not be cleaned up in time, and it is not acceptable.

Fourth, you can compare the quality and brand of the sales system and servo motors and other accessories.

Fifth, the after-sales aspect of the splitter is also very important.

In general, the above is how to choose the appropriate sorting machine for your own board type, I hope to help everyone.

If you need the machine,please contact us:

WhatsApp/Wechat: +86 136 8490 4990

www.pcb-soldering.com

www.pcb-depanelizer.com

www.laserpcbdepanelingmachine.com