Abstract: I believe everyone knows that any product that is used for a certain period of time, the automatic locking screw machine is no exception, will carry out related maintenance work, then what are the maintenance work of the automatic screw machine, what should be noted?
I believe that everyone knows that any product will be repaired after a certain period of use. The automatic screw machine is no exception. What are the maintenance tasks of the automatic screw machine? What should be paid attention to?
First: equipment maintenance
1. Clean the vacuum generator filter regularly to keep the filter clean.
2. Regularly clean the electric vacuum nozzle.
3. Regularly clean the dust in the screw feeder and add lubricating oil.
4. Regularly clean equipment dust and add lubricating oil to the motion module.
5. Regularly check whether the connecting screws of the equipment are loose. If the screws are found to be loose, handle them immediately and keep the screws fast.
Second: considerations
1. When using the automatic screw machine, the correct voltage should be used. In addition, the input voltage error range should be within ±10V and the machine should be properly grounded to prevent damage caused by machine leakage.
2. When making any adjustments to the automatic screw machine, be sure to turn off the power supply and air supply first, and unplug the plug for maintenance safety. Do not operate with power. Do not approach the non-operating personnel to avoid danger.
3. When cleaning the equipment, be sure to turn off the power supply to perform this action. Do not operate the power to avoid danger.
4. Check whether the electric batch torque is suitable for the current lock screw torque range, and retest the torque with a torque meter.
Contact Person: Mr. Alan
Tel: 86-13922521978
Fax: 86-769-82784046