Payment & Shipping Terms:
|PCB Material:||FPC, FR4||PCB Size:||350*350mm(max)|
|Cutting Accuracy:||±0.5mm||Cutting Speed:||1-200mm/s|
|Break Blade Check:||Yes||Transmission Speed:||1500mm/s(max)/adjustable|
|Transmission Height:||900±50mm||Description:||PCB Depaenling Router|
Automatic Tool Change PCB Depaneling PCB Router with Cutting stess feedback, CW-F03
An on-line PCB which is specially used to cut PCBA components(panel) into separate parts, featuring rail-mounted structure without jig cutting. It can be put into production immediately. Featuring ESD static monitoring, cutting stress feedback, and automatic tool changing, it can reach a top speed of 60000 rotates. The control system developed on the basis of our RM system can ensure customer’s rapid and accurate programming.
|Max PCB Size||350*350mm|
|Transmission direction||Left -> Right|
|Feeding plate type||Section-type transportation guide rail|
|Rail width adjustment||Automatic|
|Communication signal of upper and lower computers||SMEMA|
|PCB Positioning||Upper and lower guide rail clamping|
|Picking system||360°rotary clamping system; 2 groups of vacuum suction nozzles at most, 4 groups of ESD belt transportation/batch panel forwarding units at most|
|Cutting spindl/speed||Germany KAVO, 60,000rpm/min|
|Cooling type||Air compression|
|Automatic tool change||Yes|
|Cutting stress feedback||Yes|
|Break blade check||Yes|
|Repeat positioning accuracy||±0.01mm|
|Coordinate moving speed||1000mm/s|
|Out plate type||ESD belt transportation/batch panel forwarding unit|
|Waste collection type||Out off the track|
|Procedure programming||GERBER drawing import/Editing program through visual system|
|Power supply||AC380V±5%, 50/60Hz, 3KW|
Super Vision System
A precise machine visual system which consists of German imagining industrial camera, Moritex Lens and measurement-level light source; it
supports all functions of machine calibration, compensation and positioning, featuring highstablility and anti-disturbance capacity.
High reliability PCB gripper system
A perfect solution without jig cutting; A PCB clamping size scope of 2mm, the pick up device can realize repid loading/uploading, featuring high stability and low cost.
Automatic tool changer
The standard tool changer supports three kinds of 3.175mm tools, each of which has a top loading Capacity of 10 ones. It is combined with precise clamping system and lifting system; three axes -X1,Y1 and Z1 of the cutting mechanism can realize tool changing.
High reliability cutting system
Germany KAVO high-speed principal axis with a top speed of 60000 rotates, featuring ESD static voltage monitoring and the functions of cutting stress feedback and automatic tool changing.